100BASE-T1 MediaConverter NXP
User Manual
5
temperatures or internal failures of the device. The device can protect itself by shutting
down its own power supply avoiding further damage to itself.
The operator/user of this devices must take measures for the right protection of the
power supply lines and the according connector. The maximum power consumption
of the Technica Engineering products is written in this user manual.
Please take care that some of the products are working with a step-up converter. So,
the current needed in case of undervoltage conditions must be considered as higher
than at nominal voltage level. The user must choose the right fuse or other over current
protection measures.
1.2
Warranty and safety information
Before operating the device, read this manual thoroughly and retain
it for your reference.
The latest documentation for the 100BASE-T1 Media Converter NXP
can be downloaded
As a user of this device, you may only perform tasks that are
described in this document valid for the corresponding firmware
version.
Technica Engineering assumes no liability for any kind of damages
arising from the use of or in relation with the use of our devices. Full
responsibility of operation rests on the side of the end user.
Manufacturer warranty of Technica Engineering products only
applies as long as the user ensures proper installation, configuration
and use of the device as described in this user manual.
Use the device only as described in this manual.
Use only in dry conditions.
Do not insert any foreign object in the slots/openings of the housing.
Do not apply power to a damaged device.
The device is to be used only by specialists.
Do not open the device. Otherwise, the warranty will be lost.
