User Guide
9
The Remote Control
Installing the Remote Control Batteries
1. To remove the battery compartment cover, push the
cover away from the remote control.
2. Place two AAA size batteries in the compartment
following the battery polarity (+ and -) symbols
indicated inside the battery compartment.
3. Replace the lid in position and press until it clicks shut.
Use of the Remote Control
To use the remote control, point it at the front of the DVD
player, towards the left of the DVD disc tray.
The remote control has a range of up to 6 metres from the DVD player and at an angle of up to +
30 and -30 degrees.
Do not block the path of the beam from the remote control to the DVD player.
NOTE:
Sunlight or very bright light will reduce the remote control
sensitivity.
Switching the unit On and Off
Your DVD player requires a mains supply of to 230 volts AC at 50Hz. Please ensure that your mains
supply is compatible.
1. Unwind the mains cable and insert the mains plug into the mains outlet socket and switch on.
2. To turn the unit on, press the
Power On/Off
button on the front of the unit. The LCD display
will show ‘Hello’ followed by ‘Load’ followed by ‘No di’.
The
Power On/Off
button on the remote control works in the same way as the
Power On/Off
button on the front of the unit.
Screen Saver
Television screens can sometimes be damaged by displaying stationary images for prolonged
periods of time. To prevent this, the DVD player is equipped with an automatic screen saver to
protect your television screen.
If the DVD player is in the stop mode and no buttons are pressed for approximately fi ve minutes,
the screen saver is displayed. The screen saver moves the DVD VIDEO graphic around the screen.
Press any button on the remote control to deactivate the screen saver.
HDMAW07 HDMI DVD Player UK .indd Sec1:9
HDMAW07 HDMI DVD Player UK .indd Sec1:9
28/01/2008 11:22:17
28/01/2008 11:22:17
