Operation
•
To warm up the system, the power mains must be turned on at least five
(5) hours before operation.
STEP 1
To start the air conditioner
Press the operation button (ON/OFF button).
STEP 2
Setting the mode
Press the MODE button to select the mode of your choice.
[
(AUTO),
(HEAT),
(DRY),
(COOL) or
(FAN)]
STEP 3
Setting the fan speed
Press the FAN SPEED selector button to select the fan
speed of your choice.
[
(AUTO),
(HI.),
(MED.) or
(LO.)]
If AUTO is selected, the fan speed switches automatically.
STEP 4
Setting the temperature
Use the
or
button as appropriate to change the
temperature setting as desired.
(
reduces the temperature, and
increases the
temperature.)
* The temperature cannot be set during FAN mode operation.
STEP 5
Setting the airflow direction
When more than one indoor unit is connected, the UNIT
button is used first to select a unit. Then use the FLAP button
to set the airflow direction to a specific angle or to sweep.
STEP 6
To stop the air conditioner
Press the operation button (ON/OFF button) again.
STEP 2
STEP 1, 6
STEP 3
STEP 4
STEP 5
NOTE
01_SPW-XDR94GXH56_EN.fm Page 24 Thursday, January 22, 2004 9:07 PM
21
