background image

GB

3

• The installation must be performed by a qualified technician according to the

instructions provided with the appliances

.

• Prior to installation, check that the installation's mains voltage corresponds to that indicated

on the rating plate.

1 - INSTALLATION LOCATION

WARNING

• Avoid:

To protect the heat pump from corrosion, avoid installing it in a location where there is a risk
of it being sprayed with seawater or in an aggressive or sulphurous environment (for example,
near a hotspring).

• The equipment room in which certain system components are

installed must be free of gas fumes, flammable gas, high humidity
and high heat.

• Do not store objects near the heat pump so as not to disrupt good

airflow around the exchanger.

CAUTION

• To pre-heat the heat pump, turn on system power at least five (5)

hours prior to operation.

• It is recommended that the power be left on, unless it is not to be

used for an extended period of time.

1.

All cables and their installation must comply with current standards and regulations. For
further details, consult your installer.

2.

All elements must be properly grounded.

3.

The electrical connections must be performed by a qualified technician.

2 - ELECTRICAL POWER SUPPLY INSTRUCTIONS

ALERT SYMBOLS

The following symbols used in this manual, alert you to potentially dangerous conditions
to users, service personnel or the appliance:

This symbol refers to a hazard or unsafe practice which can result in
severe personal injury or death.

This symbol refers to a hazard or unsafe practice which can result in
personal injury or product or property damage.

WARNING

CAUTION

Содержание K60D070ZAA

















Отзывы: