05_SAP-KRV93EHFP_IT.fm Page 107 Tuesday, November 22, 2005 3:35 PM
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
1. Remote control unit.
2. Sensor:
Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Air outlet:
Conditioned air is blown out of the air conditioner
through the air outlet.
4. Air intake:
Air from the room is drawn into this section and passes
through air filter which removes dust.
5. Remote control receiver:
This section picks up infrared
signals from the remote control unit (Transmitter).
6. Operation selector.
ON Position:
In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
OFF Position:
Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
TIMER
OPERATION
TIMER OPERATION
9
8
7
5
5
3
4
2
1
TEST
OFF
ON
6
4
1
3
5
2
TEST
OFF
ON
TIMER OPERATION
9
8
7
5
6
The OFF position does not disconnect the power. Use the
main power switch to turn off power completely.
WARNING
CAUTION
TEST Position:
This position is used only for servicing the
air conditioner, so don’t leave the selector in
this position for normal operation.
7. Operation lamp (OPR):
This lamp lights when the air
conditioner is running.
8. SERVICE lamp:
When a fault occurs in the air conditioner, this
lamp turns on or flashes in combination with the other two
lamps to indicate the type of fault.
9. TIMER lamp:
This lamp lights when the system is being
controlled by the timer.
9
8
7
MODELS KAF - KPAF
6
