20
Setting the Timer
In the descriptions below, the following settings are used for the temperature
and time indicator selector button on the bottom front section of the remote
control.
•
Temperature: °C
•
Time: AM, PM
1. How to set the present
time
(Example) To set to 10:30 pm.
2. How to set the OFF time
(Example) To stop the air conditioner at 11:00 am.
NOTE
Operation
Indication
1.
Press the CLOCK button once if
the time indicator is not flashing.
The time indication alone flashes.
2.
Press the Advance, Return ( ,
) button until PM 10:30 is
displayed.
The time can be set in 1-minute
increments. Holding down the
button advances the time rapidly in
10-minute increments.
3.
Press the CLOCK button again.
This completes the setting of the
current time.
1.
Press the OFF TIME setting
button once.
The timer
indication is
displayed, and the present OFF
time is shown.
2.
Press the Advance, Return ( ,
) button until AM 11:00 is
displayed.
The timer
indication blinks.
The time can be set in 10-minute
increments. Holding down the
button advances the time rapidly in
10-minute increments.
3.
Wait a few seconds, and then
the setting is complete.
The timer
indication stops
blinking and the present time is
displayed.
01_SAP-KRV93EHFP_EN.fm Page 18 Tuesday, November 15, 2005 1:18 PM
