22
Operation without the Remote
Control Unit
Care and Cleaning
INDOOR UNIT
If you have lost the remote control unit or it has trouble, follow the steps
below.
When the air conditioner is not running
Each time the OPERATION button is pressed, the type of operation
conducted is indicated by the changing color of the OPERATION lamp. Press
the button and select the lamp color that suits your preference for operation.
The temperature is set to the room temperature minus 2°C during the cooling
operation and to the room temperature plus 2°C during the heating operation,
and the fan speed and flap are set to Auto.
1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This will damage the
internal components and cause an electric shock hazard.
Casing and Grille (Indoor Unit)
Clean the casing and grille of the indoor unit with a vacuum cleaner brush, or
wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out of
place.
1. Never use solvents, or harsh chemicals when cleaning the indoor
unit. Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if
handled improperly; be especially careful when you clean these
parts.
3. The internal coil and other components of the outdoor unit must be
cleaned every year. Consult your dealer or service center.
OPERATION button
Cooling operation
(green)
Heating operation
(red)
Stop
(lamp off)
NOTE
CAUTION
OI-892-22-EG
01_MCAF186R5I_EN.fm Page 22 Friday, March 10, 2006 10:33 AM
