P.7
RTA-8409
P.7
Assemble the hutch right panel
(C) to the hutch panels (A) and
(E) using screws (3), and cover
the screws with (10) as shown.
Insert and align the cam lock (2)
into the hutch middle panel (D),
and assemble to panel (E) as
shown and explained in page 4,
then cover the cam lock with (9).
Assemble the main panel (F) to the panels (B), (C) and (D) using screws (3) as shown.
Assemble the left panel (G) to the left back panel (M) using screws (3) and cover the screws
with (10) as shown.
STEP 9
Hardware:
3
M5x40mm
x3
STEP 7
Hardware:
3
M5x40mm
x2
10
Screw cap
x2
STEP 8
Hardware:
2
15mm
x1
9
15mm
x1
STEP 10
Hardware:
3
M5x40mm
x2
10
Screw cap
x2
(Panel G shown from the
outside, with its back
edge facing down)
(T
op)
(Outside
surface)
(Same parts as step 6,
but shown from the right)
(Panel F shown from
its underside)
