ASSEMBLY STEPS
P.5
RTA-8409
P.5
Install wooden pins (1) into panels (A), (B), (C), (D), (E), (G), (H), (I), (J), (L), (M), (O) and (P)
in the holes shown in the illustrations. Please note that other holes on the panels are
intended for other hardware in other steps. After done, set the panels aside to use on future
steps. DO NOT JOIN ANY PANELS, JUST INSTALL THE PINS.
Install the bolts (2) into the panels (E), (F) and (N) in the holes shown in the illustrations.
Please pay attention to the correct holes to use as other holes on the panels are intended
for other hardware in other steps. After done, set the panels aside to use on future steps.
STEP 1
Hardware:
1
8x25mm
x40
STEP 2
Hardware:
2
15mm
x9
