5
Unpacking
Immediately upon receipt, carefully unpack and inspect the fixture to verify that all parts are
present and have been received in good condition. If any parts appear damaged or the
shipping carton shows signs of mishandling, notify the shipper immediately. Retain carton and
all packing material for inspection. In the event that the merchandise is to be returned, the
original carton and packing must be used. The customer will be billed for a new carton and
packing if merchandise is received without the original carton and packing.
Claims
It is the customer’s obligation to notify the Freight Carrier or Shipping Company of any
physical damage or signs of mishandling immediately upon receipt. Damage incurred in
shipping is the responsibility of the Freight Carrier or Shipping Company. All other claims
not related to damage incurred during shipping must be made to the Dealer or Distributor
within 7 days of receiving merchandise.
Returns
Returned merchandise must be in the original packing with a Return Merchandise
Authorization number (RMA) clearly listed on the shipping label. Items sent by Freight
Collect or without a RMA number will be refused. Call your seller and request a RMA
prior to shipping. Be prepared to provide the model number, serial number and a
description of the nature of the return. Shipping damage resulting from inadequate
packaging is the cust
omer’s responsibility. Customer will be charged additional shipping
charges to return products received in non original packing and or cartons.
Purpose of Manual
The purpose of this manual is to explain the necessary steps for using this fixture properly and
to assure peak performance of said product functions. It is intended for use as a reference by a
fully qualified electrician, technician and lighting professional. This manual should never be
considered a substitute for any provision of a regulation, state, and/or local code. The
responsibility of complying with all state and local laws, ordinances, and regulations in regards
to installation, maintenance, and operation of this product lies with the buyer and handler of the
product. The instructions and precautions set forth in this manual are not necessarily inclusive
of or relevant to all applications. Please read the entire manual to fully understand and safely
use this product.
Power
Do not apply power to the fixture without verifying power source. For protection against
electric shock, do not attempt to use if fixture appears damaged or is not connected to
suitable earth ground. Disconnect from power mains before any service.
This fixture operates on 12vDC. The included transformer automatically adjusts to mains
voltage and frequency within the specified range and outputs 12vDC. Before applying power,
check that the power source is within the
fixture’s specified range. The listed power rating is its
average wattage under normal conditions. All fixtures must be powered directly from a switched
circuit. This fixture cannot be run on a rheostat or dimmer circuit even if used solely for a 0% to
100% switching. Consult a qualified electrician if there are any concerns about proper
connection to power.
