7
OPERATING INSTRUCTION
DMX Control
The snow machine functions on two DMX channels for snow output and blower speed. To
operate in DMX mode, you need to set the machine in DMX mode and address it.
1. Connect the SE-SNOW1 to a standard DMX controller.
2. For DMX mode set DIP Switch 10 to OFF position.
3. Set address for the machine using DIP Switch 1- 9. See Dip Switch chart as below.
4. Blue LED indicator on back of the machine stays on, indicating DMX communication is ready.
5. Move sliders on DMX controller to adjust snow output and blower speed for desired effect.
Dip Switch chart.
Dip
Switch
Value
1
1
2
2
4
3
8
4
16
5
32
6
64
7
128
8
256
9
Always be sure to maintain an adequate supply of Techni-Lux brand
Snow fluid in the fluid tank. Running the snow machine dry will
cause pump failure. Only Techni-Lux snow fluid is recommended!
