background image

 

6

Maintenance  

Make sure fixture is cool and disconnected from power mains before any service. 

 

 

Weekly operating hours and environmental conditions will establish how often the fixtures need 
cleaning.  Fixtures should be cleaned and inspected at least once a month to maintain optimum 
performance.  Accumulation of dust and fog residue increases heat build up, can lead to 
malfunctions, overheating and reduction in maximum light output, reduced fixture life and over 
all performance.  Before conducting any maintenance, disconnect fixture from power mains.   
  
1) Disconnect fixture from power mains. 
2) Use a vacuum with a soft brush to remove dust collected on external vents and internal 
components.  If using an air compressor, use low pressures and extreme care to prevent 
damaging any internal parts or effects. 
4) Clean all optical elements when the fixture is cold.  Use a soft lint free cotton cloth or tissue 
and cleaner safe for plastics.  
5) Inspect clamps and safety cables to ensure fixture is secure and safe. 
 
 

Accessory Items 

(sold separately)

 

 

Order Code 

Description 

CLAMP-C 

Medium Duty C-Clamp 

CLAMP-MINI/P 

Mini Clamp Polished for 3/4"-2" 

CLAMP-MINI/B 

Mini Clamp Black for 3/4"-2" 

CLAMP-CBHALF/N 

Half Cheeseborough Coupler Narrow 300kg Max Load 

 

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
10900 Palmbay Drive • Orlando, FL 32824 U.S.A. 
www.techni-lux.com 

Содержание DL-PINLED3W







Отзывы: