10
Maintenance
Make sure fixture is cool and disconnected from power mains before any service.
Weekly operating hours and environmental conditions will establish how often the fixtures need
cleaning. Fixtures should be cleaned and inspected at least once a month to maintain optimum
performance. Accumulation of dust and fog residue increases heat build up, can lead to
malfunctions, overheating and reduction in maximum light output, reduced fixture life and over
all performance. Before conducting any maintenance, disconnect fixture from power mains.
1) Disconnect fixture from power mains.
2) Use a vacuum with a soft brush to remove dust collected on external vents and internal
components. If using an air compressor, use low pressures and extreme care to prevent
damaging any internal parts or effects.
4) Clean all optical elements when the fixture is cold. Use a soft lint free cotton cloth or tissue
and cleaner safe for plastics.
5) Inspect clamps and safety cables to ensure fixture is secure and safe.
Accessory Items
(sold separately)
Order Code
Description
CT-G2R/RM
IR Remote Control for DL-G2R LED Gobo Projector
GH-G2R/E
Gobo Holder for DL-G2R, holds size E Glass Or Metal
ZEPO0001
Power Cord - 18AWG SJT x 6' Molded Edison to IEC
CL-CBHALF
Half Cheese-borough Coupler 2” Pipe
CL-MEGA/B
Mega 2” Pipe Heavy Duty Clamp – ½” bolt - Black
CL-MEGA/P
Mega 2” Pipe Heavy Duty Clamp – ½” bolt - Polished
CL-CLAWMINI/P
MIM Clamp Mini Claw 2" Tube Polish
CL-MINI/B
MNB Clamp-Mini 3/4"-2"Pipe Black
CL-MINI/P
MNM Clamp-Mini 3/4"-2"Pipe Polish
CL-MICRO/B
Clamp-Micro 7/16" to 1-1/4" OD Pipe Black
SC-18B
Safety Cable 18" black w/lock
SC-18S
Safety Cable 18" silver w/lock
SC-30B
Safety Cable 30" black w/lock
SC-30S
Safety Cable 30" silver w/lock