SBC-APL-350 HARDWARE MANUAL
– VER 1.00 JUN 12 2019
Page
31
of
35
6. Mounting
This section describes the mounting procedures for the SBC-APL-350. The material in area of the
mounting must provide sufficient strength for safe mounting of this device.
6.1. Surface Mounting
There are 4 mounting holes (M3) on the PCB required for surface mounting. Four M3 screws with at least
8mm head-to-tip length are required to secure this device to the surface. The distance from the PCB to
the surface must be at least 1.6mm.
Front view:
1
2
3
4
