TechNexion SBC-APL-350, Руководство по эксплуатации продукта

Страница: 21 / 35

SBC-APL-350 HARDWARE MANUAL
– VER 1.00 JUN 12 2019
Page 21 of 35
4.16. LVDS Connectors
The SBC-APL-350 has two (dual channel) LVDS connectors (Marked O and P) for connecting to a (single
or dual channel) LVDS panel: LVDS1 / LVDS2.
LVDS1 / LVDS2:
Pin
# Signal Description Pin
# Signal Description
1 12V 12V power to data dri. circuit 21 LVDS differential pair 1 signal
2 5V 5V power to data dri. circuit 22 SCL Display ID DDC clock line
3 12V 12V power to data dri. circuit 23 GND Ground
4 5V 5V power to data dri. circuit 24 SDA Display ID DDC data line
5 LCD_ENB LCD on/off at 5V 25 LVDS_D2- LVDS differential pair 2 signal
6 PWM_5V Backlight PWM at 5V 26 LED_enable Backlight on/off
7 LCD_ENBK LCD on/off at 3.3V 27 LVDS differential pair 2 signal
8 PWM_3V Backlight PWM at 3.3V 28 LED+ Backlight LED signals (5V)
9 GND Ground 29 GND Ground
10 GND Ground 30 LED+ Backlight LED signals (5V)
11 SEL18/24bit LVDS 18/24-bit selection pin 31 LVDS_CLK- Primary ch. dif. pair clock sig.
12 3.3V 3.3V power to data dri. circuit 32 LED+ Backlight LED signals (5V)
13 LVDS_D0- LVDS differential pair 0 sign. 33 L Primary ch. dif. pair clock sig.
14 3.3V 3.3V power to data dri. circuit 34 LVDS_enable LCD signal (driver IC) on/off
15 LVDS differential pair 0 sign. 35 GND Ground
16 LVDS_REV LVDS reverse scan signal 36 LED- Ground return sig. for LED
17 GND Ground 37 LVDS_D3- LVDS differential pair 3 signal
18 LVDS_R/L Horizontal reverse scan ctrl. 38 LED- Ground return sig. for LED
19 LVDS_D1- LVDS differential pair 1 sign. 39 LVDS differential pair 3 signal
20 LVDS_U/D Vertical reverse scan control 40 LED- Ground return sig. for LED
Header on SBC-APL-350: Hirose DF13-40DP-1.25V (1.25mm Pitch Double Row Straight Pin Header).
Cable receptacle: Hirose DF13-40DS-1.25C (1.25mm Pitch Double Row Socket, Crimping Socket).
4.17. SATA 3.0 Connector and SATA Power Header
The SBC-APL-350 has one internal SATA 3.0 connector (Marked R) for connecting to a SATA storage
device. SATA_PWR1 Power header (Marked Q) is located next to it.
SATA_PWR1:
Pin # Signal Description
1 +5V SATA Power
2 GND Ground
Header on SBC-APL-350: Molex 89400-0220 (2.00mm Pitch Wire-to-Board Header, Vertical, 2 Circuits,
with Kinked PC Tail).
Cable receptacle: Molex 87369-0200 (2.00mm Pitch Crimp Housing, Single Row, 2 Circuits, Natural).