TechNexion EDM1-IMX6PLUS, Руководство по оборудованию

Страница: 38 / 83

EDM1-IMX6PLUS HARDWARE MANUAL
– VER 1.00 – NOV 16 2016
Page 38 of 83
Table 13 - LVDS Signal Description
EDM
PIN
i.MX6
BALL PAD NAME Signal V I/O Description
E3_9 U2 LVDS0_TX0_N LVDS0_DATA0_N 2V5 O
LVDS primary channel
differential pair 0 negative
signal
E3_10 U1 LVDS0_TX0_P LVDS0_DATA0_P 2V5 O
LVDS primary channel
differential pair 0 positive
signal
3 U4 LVDS0_TX1_N LVDS0_DATA1_N 2V5 O
LVDS primary channel
differential pair 1 negative
signal
5 U3 LVDS0_TX1_P LVDS0_DATA1_P 2V5 O
LVDS primary channel
differential pair 1 positive
signal
9 V2 LVDS0_TX2_N LVDS0_DATA2_N 2V5 O
LVDS primary channel
differential pair 2 negative
signal
11 V1 LVDS0_TX2_P LVDS0_DATA2_P 2V5 O
LVDS primary channel
differential pair 2 positive
signal
15 W2 LVDS0_TX3_N LVDS0_DATA3_N 2V5 O
LVDS primary channel
differential pair 3 negative
signal
17 W1 LVDS0_TX3_P LVDS0_DATA3_P 2V5 O
LVDS primary channel
differential pair 3 positive
signal
21 V4 LVDS0_CLK_N LVDS0_CLK_N 2V5 O
LVDS primary channel clock
negative signal
23
V3 LVDS0_CLK_P LVDS0_CLK_P 2V5 O
LVDS primary channel clock
positive signal
27 B19 SD4_DAT1 PWM3_OUT 3V3 O
LVDS primary channel panel
backlight control
29 D18 SD4_DAT0 GPIO2_IO08 3V3 O
LVDS primary channel panel
backlight enable
31 L1 CSI0_DAT13 GPIO5_IO31 3V3 O
LVDS primary channel panel
power enable
The following pins can be used for LVDS panel detection.
Table 14 - LVDS Panel Detection Pins
EDM
PIN
i.MX6
BALL PAD NAME Signal V I/O Description
37 G23 EIM_D28 I2C1_SDA 3V3 I/O Display ID DDC data line
used for LVDS flat panel
detection. If not used this can
be assigned to General
Purpose I
2
C bus
39 H20 EIM_D21 I2C1_SCL 3V3 I/O
NOTE: The I
2
C signals for LVDS panel control are fully documented in chapter 3.14. I
2
C Bus of this
hardware manual.