EDM1-IMX6 HARDWARE MANUAL
– VER 1.00 – NOV 14 2019
Page
58
of
80
When using EDM1-IMX6 on the TechNexion EDM1-FAIRY evaluation carrier board. You can simply
configure the EDM-MNF-BOOT PCB that comes with the EDM1-FAIRY-START evaluation kit as follow:
Table 36 - EDM-MNF-BOOT Configuration for EDM1-FAIRY
SATA
SD Cardslot
eMMC on Carrier board
Figure 11 - EDM1-FAIRY with EDM-MNF-BOOT
PIN 1 is marked with
a White dot