technetix AIMA-OPSW Скачать руководство пользователя страница 4

Страница: 4 / 47

Aug/2017 - V1

Technetix Group Limited

Product User Manual

AIMA-OPSW

1 Precautions

WARNING!
This equipment is intended for indoor applications. To prevent fire or electrical shock, or

damage to the equipment, do not expose units to water or moisture.

■

You should carefully read and thoroughly understand the contents
of the manual before installing and using this equipment.

■

A typical connector is the SC/APC 8°.

Note:

An 8° angle polished optical connectors must be used.

■

At any time, there may be dangerous voltage inside the device.

■

Do not power up before the cover and the panels of the equipment
are installed and the enclosure is closed.

Cleaning

Only use a damp cloth for cleaning the front panel. Use a soft dry cloth to clean the top of the unit.

DO NOT

use any spray cleaners or chemicals of any kind.

Outage or overload requiring service and repairs

Unplug the unit and refer only to Technetix's qualified service personnel.

Servicing and repairs

DO NOT

attempt to service this unit yourself. Refer all servicing needs to Technetix's qualified service

personnel only.

WARNING!
Exposure to class 3A laser radiation is possible. Access should be restricted to

trained personnel only. Do not view exposed fibre or connector ends when handling

optical equipment.

Содержание AIMA-OPSW
















































Результаты поиска

Содержание AIMA-OPSW

Отзывы:

Бренды по названию

Популярные бренды

technetix AIMA-OPSW, Руководство пользователя

Результаты поиска

Содержание AIMA-OPSW

Отзывы:

Бренды по названию

Популярные бренды