technetix AIMA-FPAS, Руководство пользователя

Страница: 16 / 33

13
2018-08/EN V2 Technetix Group Limited
Product user manual
AIMA-FPAS
5.3 Module installation
1. Gently depress the orange retaining clip and release the hinged tab
Hinged tab
AIMA module
Retaining clip
Module fastening screw
2. Hold the AIMA module casing upright, align it with the AIMA3000 slide rails for the correct slot,
and insert the module until it reaches the multi-pin connector.
DO NOT use excessive force when inserting the module, but ensure the RF connectors at the rear of the module are
securely connected to the chassis's RF connectors.
AIMA-FPAS Product User Manual
Pacific Broadband Networks 15 January 2015 Page 16 of 36
5.3 Module Installation
1. Gently depress the orange retaining clip and release the hinged tab
2. Hold the AIMA module casing upright, align it with the AIMA3000 slide rails for the correct slot,
and insert the module until it reaches the multi-pin connector.
DO NOT use excessive force when inserting the module, but ensure the RF connectors at the
rear of the module are securely connected with the chassis's RF connectors.
CAUTION!
The module MUST be installed correctly to ensure a proper
connection of the module’s multi -pin connector and the backplane.
Tip:
When inserting the module into the guide rails, vertically tilt the module slightly to check
that the guides are properly seated on the rails. The module is guided to the correct
position using the large metal fastening screw on the lower part of the front panel.
Hinged tab
Orange retaining clip
AIMA module
Module fastening screw
CAUTION!
The module MUST be installed correctly to ensure the module's multi-pin connector and
backplane are properly connected.
Tip:
When inserting the module into the guide rails, vertically tilt the module slightly to check that the
guides are properly seated on the rails. The module is guided to the correct position using the large
metal fastening screw on the lower part of the front panel.