7
For mounting with the 3M adhesive
first clean the magnet and the place you want to
mount the camera with nail polish remover or alcohol. (
Warning!
Cleaning with alcohol or
nail polish remover may damage the surface you are using.) Glue the 3M adhesive first to
the magnet surface of the camera stand. The surface should be flat to maximize the surface
between 3M adhesive and the surface of the mounting area. Adjust the camera up or down
to the applicable angle.
3M adhesive for the
mounting stand of the
camera
Note:
Press and hold for 60 seconds to allow adhesive to bond
to the surface. Bond strength will increase through time. At room
temperature, wait for at least 24 hours to achieve 90% bonding
strength, and 72 hours for 100% bonding strength.
5. Monitor Easy IP Battery Camera
5.1 Monitor Camera
Press the camera thumbnail to monitor live view image.
In the Live View screen, are 4 function buttons on the top left of the screen.
1. Snapshot: Get an instant
picture
3. Microphone: Voice transmission via the
microphone of the mobile device and the built-in
speaker of the camera.
2. Mute: Turn off the speaker of
the mobile device
4. Record: Record an instant video clip
2.
1.
3.
4.
