1. Power management and Charging
Charge the wristband before first use.
1.1.
To switch the wristband ON, press and hold the button for 5 seconds until the wristband
will show the icon
. In any mode, press and hold the button for 5 seconds, the
wristband will show
and shut down. To switch the wristband back to ON, press and
hold the button for 5 sec. again, and the wristband will show
and starts up again.
1.2.
The wristband has a built-in (cannot be disassemble) battery for power supply.
Charge
the wristband before first use,
then synchronize it with your mobile device. While
charging, the screen of the wristband will indicate a charging symbol. The button of the
wristband will not respond during charging.
NOTE:
The wristband need at least 3 hours to be fully charged. 3 hours charging time will
last approx. 5 – 6 days of use.
1.3. Important Notice:
For charging this wristband you have to take the complete display
out of the silicone case. When it is fully charged you have to put it back to the silicone case,
here you have to
KEEP ATTENTION:
put it back in the right direction, means the little
button pit at the display has to be on the same side as the little button elevation of the
silicone band.
2. APP Installation
1) Apple iPhone (iOS version 7.0 or above),
download Technaxx “
My Fitness
” Sport software
at APP store, then install it on your smart phone.
2) Android phone, download Technaxx “
My
Fitness
” Sport software in Google Play, then
install it on your smart phone. If the download fails
please try again and re-install.
When installation is completed, you see the picture
MY FITNESS and after the picture in the right and
choose your device. Customize all requirements in
“My Profile”, “Workout Goal” and “Smart
Alarm”
. Then start to synchronize your wristband.
