7
Model: TX-193 Article No. 4999, 05/2022
Connection the air hose and Vent
To connect the Air hose (8) with the connector (7) push the outer ring of part (7) back, press
the air hose (8) into the connector (7) and let the outer ring come back to original position.
The Air hose (8) is now securely connected to the unit. To remove Air hose (8) push the
outer ring of the connector (7) back (in direction of the unit) the air hose (8) will get released
from the air connector (7).
Connect the 90° Adapter to the vent
A Press the Vent adapter in direction of
the arrow
B Move the lever 90° in the direction of
the arrow.
Connect the adapter Picture C
1
st
adapter is for bicycle vents, depending
the bicycle the adapter must be screwed on
the bicycle first, then connect the 90°
Adapter
2
nd
adapter is for e.g. air mat, connect the
adapter like shown on picture A and B
3
rd
Adapter is a Ball needle connect the
adapter like shown on picture A and B
Operation
Air compressor
After connecting the product to main source, the item starts in batterie-loader mode. To
change to air-compressor mode press the button
“Lamp Charger, Compressor”
one time.
The Information on display change to pressure units.
Select the pressure unit of your wish by pressing the
“
Enter
”
button.
Chose the pressure, e.g. 2.40 bar by pressing the
“
+
”
or
“–“
button.
