9
Target Recording Time 1 & 2:
Set the monitoring time of the camera, you can set
the specific time period for the camera to record. You can set the start time and end
time of camera recording. After the setting is completed, the camera will only record
during the set time period every day, and it will be on standby at other times.
Options: [On] / [Off]
To set the time use UP, DOWN and MODE (left) button (5/8/9).
Beep Sound:
[On] / [Off] (default).
→
Select and press OK button to confirm. Open
den Beep sound menu to turn On or Off the confirmation sound of the buttons.
Endless Capture:
[On] / [Off] (default).
→
Select and press OK button to confirm.
If you activate Endless Capture the device will capture photo or/and video,
depending on the mode you choose, until the storage of the MicroSD card is reached.
When the storage is full the recording will move on. Which means that the oldest file
(photo/video) will be deleted, every time a new photo/video is recorded.
Date format:
Date format: select between [dd/mm/yyyy] / [yyyy/mm/dd] (default) /
[mm/dd/yyyy].
Press UP/DOWN button (5/8) to adjust the values.
→
Select and press OK button (11)
to confirm.
Time & Date:
To set time & date use up, down and mode (left) button to switch the
values and the position.
→
Select and press OK button (11) to confirm.
Audio recording:
Camera will record audio when recording video. Options: [On]
(default) / [Off].
→
Select and press OK button (11) to confirm.
Reset Settings:
[Yes] / [No] (default).
→
Select and press OK button (11) to confirm.
Restore the camera to factory default settings.
Version:
Look up the Firmware information of the camera.
Format Memory Card:
[Yes] / [No] (default).
→
Select and press OK button (11) to
confirm.
Attention:
Formatting the memory card will delete all data permanently. Before using
a new memory card or a card that has been used in another device previously,
please format the memory card.
Info:
⚫
Cards up to 32GB must be formatted in FAT32.
⚫
Cards of 64GB or more must be formatted in exFAT.
