Technalogix TXF-1000, Руководство по эксплуатации

Страница: 25 / 71

1
Safegua
rds
2
Terms and
Warranty
3
Principl
e o
f
Operati
on
4
Ins
talla
tion
5
Operati
on
6
C
ont
rol Syst
em
7
RF Componen
ts
8
Power
Supp
ly
9
Maintenan
ce
10
Troubleshoo
ting
Main Screens
From each of the two main screens, the RF and the FM main screen, all of the
system’s main parameters can be viewed at a quick glance. To toggle between
these two screens, simply touch:
or
For the Main RF and Main FM screen, there are three common components
between each screen:
Level Bars:
The four level bars show real time system performance and
help illustrate any transient changes that occur. Some of the
units of measure can be adjusted in Settings Menu
described later in this section.
Summary Bar:
The summary bar at the bottom of the screen will stay in
place no matter what screen is being viewed to allow for an
operating summary at any time, as described below:
Toggles between Main Screens and Menu Screen for
settings. The menu screen has additional settings and
monitoring over the Main Screen, and is illustrated in the
next section.
Forward RF power level in % or watts. Mimics data from
level bar. Overdrive protection starts at 110% where the
power amplifier/transmitter folds back power by adding
attenuation to the input until a safe level obtained. System
continually checks power level and tries to bring RF power
level back to where it was when fault occurred. If overdrive
occurs, a warning is displayed in red text near the top of the
touchscreen and the event recorder logs the event.