23
www.lyngsat.com
for the updated satellite parameters.
IP(optional)
PIC-3.4- 8
This page shows the local IP setup and Input IP information. There is one channel available
to receive IP streams.
Then you can press the “Apply” button to save your settings. Before
you can receive the IP streams, you should configure the following parameters:
IP Address:
Local IP setting for connecting to the server. This IP and the
management
server’s IP should be in the same section.
Subnet Mask:
Network Mask setting for connecting to the server. It should be
the same as management server: 255.255.255.0
Gateway:
Gateway setting for connecting to the server. It should be the same
as the management server.
Speed Mode:
Here shows the speed mode of the TSIP port.
Mac:
Here shows the MAC address of IP module. The MAC address is fixed
and not editable.
The parameter of channel:
Enable:
Enable or disable corresponding output channel
Source IP Address:
it is the IP address of the source IP streams.
Source Port:
It is the port of source IP streams.
