Techmar Garden Lights 6009011, Инструкция по эксплуатации

Страница: 7 / 12

7
EN - INSTALLATION AV TIMER OCH TRANSFORMA-
TOR
1. Cable to transformer.
2. Cable from the timer to the lights.
3. Display
4. Photo-cell
5. Up/Down Switch Setting
CHECK !
• This is a photo-timer switch which has been designed
to be connected to 12 Volt Transformers. This timer
can be used for low voltage outdoor lighting.
• This timer can be installed in- and outdoor
uncovered. When you install the timer indoor you
must take care that the timer can respond on dusk
and dawn influences!
• This timer works at a temperature between -20°C
and 50°C.
• Maximum Wattage to be connected to the timer is
150 Watt.
CONNECTION OF TIMER AND MAIN CABLE TO THE
TRANSFORMER
• Connect the cable with the lights to the photo timer
switch
• This timer should be screwed to the wall with the
cable to be connected to the transformer pointing
down.
• Connect the input cable of the photo timer switch to
the transformer
• Insert the plug of the transformer into the electric
outlet
OPERATION PROCEDURES:
After installation, the voltage indicator light will
illuminate.
Timer switch is on, lights always burn.
Auto: Switches on and off automatically
at dusk and light, timer switches on at
dusk. Timer switches off at light.
Timer automatically switches on at
Dusk. Timer will be switched on during
the time mentioned on the display (1-9).
cycle repeats every 24 hours
With certain installation the lights should work
now. If not, check the following things:
• Connections between the main cable and the wire
from the lamp.
• Check the lamps.
• When no single light is working, check the
transformer and/or timer and let a specialist
measure them both.
FUSE
This timer is secured against short circuiting. -
(250V - 20A)
0
A
9 1