Techly IDATA HDMI-MX373, Руководство пользователя

Страница: 9 / 16

HDMI EXTENDER MATRIX
9
EN
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
This product delivers reliable HDMI transmission over single cat5/Scable and enable matrix extender
function through Lan switch which supports IGMP (Internet Group Management Protocol).
It supports TCP/IP. Easy and simple to build video network matrix and it is with good stability and
anti-interference capability.
Widely applied in the fileds requiring full HD, such as advertising business, product show, CCTV field
etc.
1. InstallatIon InFormatIon
1. Do not mix up transmitter TX and receiver RX before installation.
2. Do not mix up IR blaster extension cable and IR receiver extension cable before installation.
3. Do not plug and unplug IR blaster extension cable and IR receiver extension cable with power on.
4. Use DC5V power supply only. Please make sure specification matched if using adapters not
supplied by us.
2. pacKage contents
Model IDATA HDMI-MX373
• HDMI to Lan senderTX * 1 pc
• DC5V1A Power Supply* 1pc
• iR blaster extension cable * 1 pc
• User Manual * 1 pc
Model IDATA HDMI-MX373R
• Lan to HDMI receiver RX * 1 pc
• DC5V1A Power Supply* 1pc
• iR receiver extension cable * 1 pc
• User Manual * 1 pc
3. InstallatIon reQUIrements
3.1 HDMI source device (computer graphics card, DVD,PS3, HD monitoring equipment etc)
3.2 Display or projector with HDMI port.
3.3 Lan switch with IGMP or IGMP Router function or VLAN. IGMP (Internet Group Management
Protocol) is a protocol that manages multicast groups operating between hosts and routers
directly connected. The host informs the router, for example, that an application wants to join
a multicast group. Check that your Swith-hub or router supports this function before making a
mixed installation with other network devices.
3.4 UTP/STP cat5e/6 cable
3.5 Network cable length requirement between switch and TX/RX cascade:
CAT5E ≤ 100m
CAT6 ≤ 120m
4. InstallatIon procedUres
4.1
Assembly cat5e/6 network cable
Follow the stanard of EIA/TIA-568B:
1-Orange/white 2-Orange 3-Green/white 4-Blue
5-Blue/white 6-Green 7-Brown/white 8-Brown