5. poWer led: This green LED illuminate when the device is connected
with power supply.
6. ouTa KeY: Press this button to select the input source to HDMI OUT A.
7. ouTB KeY: Press this button to select the input source to HDMI OUT B.
8. edId KeY: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio
output mode.
9. arC KeY: Press this button to open or close the ARC function.
10. rsT KeY: Press this button the matrix will reset to factory state(INPUT1,
2.0CH AUDIO MODE,ARC function closed)
11. Ir: Remote control signal receive.
5.2 rear panel
1. InpuT sourCe: These slots are where you connect the HDMI source
output from DVD, PS3.
2. hdMI ouT: This slot is where you connect the HDTV or monitor with
HDMI cable.
3. sTereo ouT: This slot is where you connect to the speaker with 3.5mm
earphone cable.
4. ToslInK ouT: This slot is where you connect to the amplifier with
optical fiber cable.
5. dC In: Plug the 5V DC power supply into the unit and connect the
adapter to AC wall outlet.
aTTenTIon:
• The Toslink and Stereo audio follow the OUT A HDMI audio.
• The In1 (The first input port) support HDCP2.2 input only.
• The In6 (The sixth input port) support MHL input only, use MHL to HDMI
Cable to connect smart phone and matrix.
• The output A support ARC function only.
6. XIII. reMoTe ConTrol
➀
sTandBY: Press this button will standby or power on the matrix.
➁
audIo edId: Press this button will Select the audio output mode
(2.0CH,5.1CH,7.1CH), and the LED will indicate the corresponding state .
➂
arC: Press this button will Open or close the ARC function, and the LED
will indicate the corresponding state.
➃
pIp: Press this button will Open or close the PIP function. When open PIP
function, the OUTA and OUTB will switch to the same input source.
select: Press this button will select the PIP source.
enter: Press this button will confirm the select PIP source.
➄
ouTa: Press these buttons will fast switch to select input source to HDMI
OUTA. And the LED will indicate the corresponding input source.
➅
ouTB: Press these buttons will fast switch to select input source to HDMI
OUTB. and the LED will indicate the corresponding input source.
arC funCTIon: If you need to use ARC, your HDTV must support this
function, when you open the ARC function, the Toslink of the Matrix will
output the HDTV current display content audio. Otherwise it will output
the Matrix input source audio.
7. applICaTIon eXaMple
HDMI Matrix 6×2
QUICK INSTALL GUIDE
4
In compliance with EU Directive WEEE this product is marked with this
symbol. It means that used electrical and electronic products should not
be mixed with general household waste. There is a separate collections
system for these products in compliance with WEEE directive, otherwise
contaminative and hazardous substances can pollute the environment.
With the CE sign, Techly® ensures that the product is conformed to the
basic European standards and directives.
WWW.TECHLY.COM
