background image

EN

7

HdMI HdBasEt ExtEndEr

Dear Customer

Thank  you  for  purchasing  this  product.  For  optimum  performance  and 
safety, please read these instructions carefully before connecting, 
operating or adjusting this product. Please keep this manual for future 
reference.

IMPOrtant saFEtY InstrUCtIOn

IntEndEd UsE

We do not permit using the device in other ways like 
described in this user’s manual. Use the product only 
in dry interior rooms. Not attending to these 
regulations and safety instruction might cause fatal 

accidents, injuries, and damages to persons and property. The 
manufacturer/supplier assumes no liability for damages caused by 
failure to comply with the intended use.

To reduce risk of electric 
shock, this product should 
ONLY be opened by an 
authorized technician when 

service is required. Disconnect the product from mains and other 
equipment if a problem should occur. Do not expose the product 
to water or moisture.

C A U T I O N

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

•  Your product is not a toy and is not meant for children, because it 

contains small parts which can be swallowed and can injure when 
used inappropriately!

•  Please install the system and devices attached to it in a way that 

persons cannot be injured, or objects not be damaged for example 
by dropping or stumbling.

•  Please  remove  the  packing  materials,  because  children  may  cut 

themselves on them while playing. Furthermore, there is a risk of 
swallowing and inhalation of incidentals and insulating material.

•  Avoid places with high temperatures, or humidity, or places which 

might come into contact with water. Do not install the product close 
to openings of air conditioners, or at places with an excessive 
amount of dust or smoke. Keeps distance from flammable and 
explosive devices

•  Do  not  install  the  product  at  places  subject  to  vibration,  or 

oscillation

•  Do not modify and alter the product and any accessories! Do not 

use any damaged parts.

•  Keep enough space around all devices for a good ventilation and 

free motion and to avoid damages.

•  Do not plug-in/out the cables when it is in using.

Extender HdMI HdBaset

Extender HdMI HdBaset

Содержание Cat.5E/6/7













Отзывы: