EN
11
Faq
q:
TV display “waiting for connection” on the bottom right corner?
a:
1) Please check if the power supply of the unit (sender) and RX
(receiver) is well connected and the power indicator led lights on.
2) Make sure all cables are firmly connected.
q:
TV display “Please check the TX input signal”?
a:
1) Please check if there is an HDMI signal input of the unit
2) Try to connect the signal source directly to display device to see
if there is signal output from source device or change the signal
source, HDMI cables and try again.
q:
Display not fluent and stable?
a:
1) Please check the cable length between the unit (sender) and RX
(receiver) is within the required range.
2) Press “reset” button on the unit/RX panel, reset and reconnect.
Maintenance:
clean only with a dry cloth. Do not use cleaning
solvents or abrasives.
warranty:
no guarantee or liability can be accepted for any changes
and modifications of the product or damage caused due to incorrect
use of this product.
In compliance with EU Directive WEEE this product is marked
with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste.
There is a separate collections system for these products in
compliance with WEEE directive, otherwise contaminative and
hazardous substances can pollute the environment.
With the CE sign, Techly
®
ensures that the product is conformed
to the basic European standards and directives.
HDMI Extender Splitter over CAT6 with IR
Содержание 025572
Страница 12: ...www techly com ...
