TechLogix Networx TL-SMG-4C Скачать руководство пользователя страница 6

Страница: 6 / 7

TL-SMG-4C Install Guide

Standalone Command Settings

RS232 Command

Description

Feedback

/SetOn:command!

Display On command
Length < 20 characters

#SetOn:command.\r\n

/SetOff:command!

Display Off command
Length < 20 characters

#SetOff:command.\r\n

/SetTVVol-:command!

Volume Down command
Length < 20 characters

/SetTVVol-:command.\r\n

/S:command!

Volume Up command
Length < 20 characters

/S:command.\r\n

/SetTVVolM:command!

Mute command
Length < 20 characters

#SetTVVolM:command.\r\n

/Baudrate 2400!

Set the Display's baud rate.
Acceptable values are 2400,
4800, 9600, 19200, 38400,
57600, 115200

#Baudrate command.\r\n

/FactoryDefault!

Reset SMG-4C to factory defaults #FactoryDefault.

The following ASCII code list are the commands to define power and
volume commands for the display.

Содержание TL-SMG-4C

Страница 3: ...stall Guide RS232 Tx Rx 12v E Config F On Off Vol Vol Press for 3s MUTE Press Both Display A B C D I O Layout A Display On B Display Off C Volume Down D Volume Up E RS232 and 12 VDC Connection F Configuration Port ...

Страница 4: ...rough 70mm 2 Connect the mounting plate and any necessary spacer extensions per the drawing below 1 Plug the included 4 pin cable into the bottom of the TL SMG 4C 2 Plug the other end of the 4 pin cable into the RS232 Power port on the TL SM3C Surface Installation TL SM3C Connection ...

Страница 7: ...ble Connection One 1 4 pin removable terminal block Config Port One 1 micro USB type B receptacle Surface Dimensions 76mm 2 99 in diameter 2 8mm 0 11 in tall Hole Insert Dimensions 56mm 2 20 in diameter 31 6 mm 1 24 in deep Supported Baud Rates 2400 4800 9600 default 19200 38400 57600 115200 Warranty 3 years ...