TECHFASS 534821E2, Руководство пользователя

Страница: 24 / 26

www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP 24
Deleting card 3 using the card 4, table after deleting card 3
•
Card 4 gets lost
– Delete it
using the card 2 , which is available, and using the procedure from chapter 7.10.3
–
Read + (inserting) programming card , then 5x + (inserting) programming card again, then card 2 , and finally
+ (inserting) programming card again. Register the change in your table .
Deleting card 4 using the card 2, table after deleting card 4
•
It is necessary to add another card (card 6). We proceed with the procedure from chapter 6.7.1 again. 1
– Read
+ (inserting) programming card, read cards 1-5, after 15 s the programming mode is exited. Register the change
in your table.
Table after inserting card 6
A new card is always inserted at the position after the last inserted card. In case of deleting all cards using the procedure
described in
chapter 7.10.4 , it is necessary to create a new filing table.
position card
1 card 1
2 card 2
3 card 3 (lost)
4 card 4 (available)
5 card 5
position card
1 card 1
2 card 2
3 card 3
4 card 4
5 card 5
position card
1 card 1
2 card 2 (available)
3 card 3
4 card 4 (lost)
5 card 5
position card
1 card 1
2 card 2
3 card 3
4 card 4
5 card 5
position card
1 card 1
2 card 2
3 card 3
4 card 4
5 card 5
6 card 6