
5
Place the device on the assembly plate with a slight anti-clockwise
turn and then turn it clockwise without using too much force until
it engages.
After reassembly, the device returns automatically to normal operation
mode. – Check the functionality of the smoke detector by pressing the
user key until you can hear the test alarm signal.
!
The smoke detector may be disassembled for a
maximum of
2 weeks.
After completion of the renovation work, restore the
functionality of the SDs as fast as possible.
If they are disassembled for longer, servicing work from Techem
is necessary and may be subject to charges.
What should I do if the smoke detector’s
environmental monitoring is activated?
!
If the smoke detector‘s environmental monitoring is activated,
the cause must be rectified as fast as possible.
Causes of malfunction include, for example, all kinds of items in
the vicinity of the smoke detector (e.g. lamps, openly laid electri-
cal cables, room partitions, very high cupboards / shelves). – The
minimum gap from items must be 60 cm – measured from the
outer edge of the SD. In extremely confined rooms, for example
in hallways, it is possible for the Techem technician to set a lesser
minimum clearance in the radio frequency smoke detector during
installation.
Techem radio frequency smoke detector 2 – operating instructions
28