techem HKR, Руководство по эксплуатации, Страница: 22 / 27

•
Confirm with OK.
•
The first setting time will appear on the display
(0:00). This cannot be changed. In addition, the
display shows bars for every other switching
interval.
•
Confirm with OK.
•
Set the temperature that is to be maintained from
0:00 onwards (example shows 17.0°C).
•
Confirm with OK.
•
The next switching time appears on the display
(example shows 6:00).
•
Use the setting wheel to set the time.
•
Confirm with OK.
•
Then, select a temperature for the selected switching
time.
•
Keep repeating this process until you have finished storing temperatures for the period
from 0:00 to 23:59.
•
After all 7 switching times have been selected, 23:59 will appear on the display as end
time.
•
Confirm with OK.
In Auto mode, the temperature can be modified at any time via the setting wheel. The modified
temperature will then be retained until the next program changeover.
2. Weekly program: Examples
The energy-saving controller allows you to store up to 3 heating periods (7 switching times) with
individual temperature settings for each day of the week. The factory setting consists of two
heating phases (from 6:00 until 9:00 and from 17:00 until 23:00 respectively) for every single
day of the week:
From 00:00 to 06:00 17.0°C
From 06:00 to 09:00 21.0°C
From 09:00 to 17:00 17.0°C
From 17:00 to 23:00 21.0°C
From 23:00 to 23:59 17.0°C
To represent the switching periods, the display shows bars for every other
switching interval. In this example, no bars are shown for the interval from 0:00 to
6:00. Bars are only shown on the display for the intervals from 6:00 to 9:00 and
from 17:00 to 23:00.
If a room also needs to be heated at around noon, the corresponding program might look like
this:
22