• Do not mix alkaline standard and rechargeable batteries.
• Do not mix old and new batteries.
• Non-rechargeable batteries should not be charged.
• Rechargeable batteries should be charged under adult supervision only.
• Exhausted batteries should be removed.
• The supply terminals should not be short-circuited.
• Do not put batteries next to or in a heat source (fire, electronic heating device, etc.)
• Do not hit batteries against hard objects.
• Do not submerge batteries in water.
• Batteries should be inserted with the correct polarity.
NOTE: If normal operation of the product is disturbed or interrupted, strong electro-magnetic interference may be
causing a problem. Reset the product by turning it completely off and then back on. If normal operation does not
resume, try replacing the batteries and moving the product to another location.
1. Switch on the power. After initial startup, the blaster will default to blue team and single shot mode.
2. Press the gun selection button to toggle between 4 gun modes.
3. Press the team selection button to toggle between teams. There are 4 colours to represent a Possibility of 4
teams: Blue, Red, Yellow or White.
4. The blaster functions as both a gun and an infrared receiver, so simply aim and shoot at an opponent’s blaster
to register a hit. Once hit, the life indicator will reduce accordingly, and the blaster will vibrate and emit a sound.
When your life indicator reaches 0, the indicators will flash and you will not be able to shoot anymore.
• If you are not using this product for a long time, remove the batteries (Applicable to the remote control)
• Clean product with a damp cloth
• Avoid exposing the toy to the sun or heat
• Do not immerse the toy in water as it will damage the electronic components.
Distributed by: TechBrands by Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia
Ph: 1300 738 555 Int’l: +61 2 8832 3200 Fax: 1300 738 500 www.techbrands.com Made in China
Maintenance & Repair
Operating Instructions
Troubleshooting
Warnings Regarding Batteries
Problem
Reason
Solution
Blasters do not work
Low Battery
Replace the Batteries
Infrared signal could not reach the blaster
because the distance is too far or angle is
wrong
Reduce the firing distance and firing angle
Obstacles blocking the infrared signal
Remove the obstacles
Blasters Operate
Automatically
Low Battery
Replace the batteries
Overexposure to direct sunlight
Block sunlight or play in an area without
direct sunlight
Competing infrared transmission from
other devices, such as TV remotes
Stop using or move away from competing
infrared devices
Gun Modes
Single Shot
Laser Guns
Machine Gun
Plasma Gun
Shots
Health Reduced by
Each Shot
