TECH ST-408, Руководство пользователя, Страница: 22 / 28

ST-408 – user's manual
➢
opening time
➢
single stroke
➢
minimum opening
➢
valve type
➢
room regulator
➢
weather sensor
➢
room regulator reduction
➢
return protection
➢
sensors (it should be selected whether the measurement of the furnace
sensor and return sensor is to be read from the main controller –
ST-408 or from ST-61 module output – own sensors )
➢
change in the preset valve temperature
➢
difference in room temperatures
➢
external sensor calibration
➢
factory settings . This parameter allows to return to the settings of a
given valve, saved by the manufacturer. Restoring factory settings does
not change the set valve type (
CH or floor )
➢
valve removal . This function is used for a complete removal of a valve
from the controller memory. Valve removal is used e.g. at disassembling
the valve or module replacement (re-registration of a new module is
necessary).
The above parameters that are not described in this chapter in detail are
set identically as described in Chapter Valve 1 .
IV.h) Internet module
NOTE
Controlling of this type is possible after purchasing and connecting, to the
controller, the additional control module
ST -500 which is not attached to the
regulator as a standard feature.
The Internet module is a device enabling remote control of the boiler
over the Internet or local network . On the home computer screen the user
controls the condition of all boiler system devices and the operation of each
device is presented in the animated form.
Apart from the possibility to view the temperature of every sensor, the
user has the possibility of introducing changes of the set temperatures for
both the pumps and the mixing valves.
After activating the Internet module and selecting the DHCP option, the
controller will automatically download such parameters from the local network
as: IP address, IP Mask, Gateway address and DNS Address. In the case of
any problems with downloading network parameters of the existing network,
there is a possibility of setting these parameters manually. The method of
-
22
-