TECH EU-RI-1, Руководство пользователя

Страница: 8 / 16

TECH
8
1. Display
2. EXIT button – the button is used to return to the main screen view.
In the main screen view, press this button to display the temperature value read from the built-in room sensor,
the floor temperature value.
Hold EXIT button to delete the pre-set temperature value.
3. MINUS button – press this button to decrease the pre-set temperature. In the menu, use this button to adjust
particular parameters.
4. PLUS button – press this button to increase the pre-set temperature. In the menu, use this button to adjust
particular parameters.
5. MENU button – press this button to enter the menu with operation parameters. While editing parameters, press
MENU button to confirm the changes and move on to edit the next parameter.
NOTE
Hold the MENU button for about 5 seconds to enter the second menu where it is possible to register the regulator
in the main controller, calibrate the temperature read from the room and floor sensors, check the software
version and restore factory settings.
1. Current temperature
2. Heating to pre-set temperature active
3. Manual mode active
4. Day mode active
5. Night mode active
6. Current time
7. Floor temperature (the icon is displayed only when the floor sensor has been activated in the regulator menu)
1
2
3
6
5
4
7