SUMMARY
This manual must accompany enclosed product and should be kept for future use with
this product. Please read manual instructions carefully before unit installation, operation or
maintenance. Pay particular attention to safety instructions.
UNPACKING
After removing packaging material check that product is in perfect condition and that
there is no visible damage to product. If in doubt, do not operate unit and contact the
dealer from whom item was purchased.
INSTALLATION AND OPERATION
1
、
Remove power cord and air hose from pouch.
2
、
Screw air hose into power unit.
3
、
Plug power cord into power input.
4
、
Place valve connector over tire valve.
5
、
Attach power connector to power source.
(Before attaching, ensure switch is in off (“o” position)
6
、
To view current tire pressure, read illuminated digital gauge.
7
、
Press set key to select your favorite pressure unit
(Bar, Kpa, Psi)
8
、
Depress “Normal” switch to achieve inflation without preset
and auto stop. Pay good attention to tire pressure at all times.
DO NOT OVER-INFLATE TYRES.
9
、
For preset and auto stop operation – Preset tire pressure
according to vehicle manufacturer guidelines using
and
controls until 2.19 Bar appears on display.
Then depress “preset “switch to inflate tire/item. Compressor will
stop automatically when pressure in tire reaches 2.19 Bar.
10
、
Once desired tire pressure is achieved, turn compressor
off (“O” position). Unplug 12v cable. Replace air hose and
power cable in pack.
ALLOW CONNECTION TO COOL BEFORE UNPLUGGING AIR HOSE.
