Tech Works IC-52B, Руководство по эксплуатации и установке, Страница: 15 / 26

2/15 Page 15 of 26
Audio Switching Configuration Jumpers
The IC-52B has two Audio Channels , designated as
Remote Microphone to Operator Speaker and Operator Microphone to Remote Speaker
With all Signal Flow Jumpers in place, Half Duplex Operation is supported
Half Duplex Operation , the Microphone Inputs and Speaker Outputs are sequenced :
When the Operator is “
Listening ”:
The Remote Microphone is ON
The Operator Microphone is OFF
The Operator Speaker is ON
The Remote Speaker is OFF
When the Operator is “
Talking
”:
The Remote Microphone is OFF
The Operator Microphone is ON
The Operator Speaker is OFF
The Remote Speaker is ON
However, the control of the
Microphones and Speakers are controlled by Jumpers
Any of these sections may always be ON
These ‘always’ selections are useful in implementing in implementing:
Always Listening , Push to Talk
Full Duplex Operation
Always Monitoring to the PA-BUSS Output
Etc.
Operator Microphone ON:
Always On ALWAYS
Sequenced SWITCHED
Remote Microphone ON:
Always On ALWAYS
Sequenced SWITCHED
Operator Speaker ON
(Also Keys Remote Microphone):
Always On ALWAYS
Sequenced SWITCHED
Remote Speaker ON
(Also Keys Operator Microphone):
On when the Intercom is Active ALWAYS
Sequenced SWITCHED