Tech Source RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND, Инструкция по установке и справочник

Страница: 26 / 36

Raptor Drivers for HP-UX Installation and Reference Manual
4-6
exists,
xinit
will use the following as a default:
xterm -ge1+1 -n login \
-display :0
If no specific server program is given on the command line,
xinit
will look for a file in the user's home directory called
.xserverrc
to
run as a shell script to start up the server. If no such file exists,
xinit
will use the following as a default:
X :0
Note that this assumes that there is a program named
X
in the
current search path.
To startup the server using
xinit
, type:
prompt% xinit -- /usr/bin/X11/X
You may also add any other command line arguments to the end of
the line. For additional information on the use of
xinit
, refer to the
xinit
man page.
See Section 4.2 for configuring the file
/etc/X11/X0screens.
4.6 Common Desktop Environment (CDE)
Common Desktop Environment (CDE) is available with HP-UX and is
independent of the Raptor software. In order to use CDE, you need
to configure only the
X0screen
file. See Section 4.2 for configuring
the file
/etc/X11/X0screens.
CDE can be started by typing:
prompt% /usr/dt/bin/dtlogin