Tech Source RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND, Инструкция по установке и справочник

Страница: 11 / 36

Chapter 2 – Hardware Installation
2-3
Tech Source offers two flat panel subsystems: the Raptor 2100FPS
with a resolution of 2048x2048 (4MP), and the Raptor 2500FPS with
a resolution of 2560x2048 (5MP). Each subsystem is comprised of
one LCD flat panel (4MP or 5MP), one Raptor 2500T-DL graphics
card, and a standard Dual-Link DVI cable to connect them together.
On the back of the Raptor LCD panel are two DVI inputs, labeled A
and B. Plug the Dual-Link cable into either port. Optionally, connect
a second Raptor 2500T-DL card to the remaining port. Select
which signal to display by accessing the OSD (on-screen display) or
by sending the appropriate signals to the panel's RS232 interface.
For more information on the RS232 interface, please refer to the
Raptor LCD manual.