Tech One Yak54 EPP Скачать руководство пользователя страница 7

Страница: 7 / 8

34.Install the wheel and the wheel pant.

35.Insert the landing gear into the slot .

36.Install the motor into the motor mount ,and then tighten
them by using 4pcs screws.

37.Install the ESC on the right of the fuselage hole , and
then tighten them with the band.

38.Use the knife to cut off the superfluous band .

39.Install the lipo battery pack ,and then fix them with velcro.

40.There is a receiver location under the wing, connect
the servo and ESC wire to the receiver , And then insert
the receiver into the slot .

41.Fix the propeller with O-ring .

－

Содержание Yak54 EPP

Страница 3: ...s the picture shown insert the servo wire into the pre cut slot 7 Use the same method to install the elevator servo as installing the rudder servo 8 Install the left aileron servo 9 Use the same method to install the right aileron servo 10 Pls use a hobby knife to cut a slot which is vertical to the servo arm so that can install the servo control horn easily 2 ...

Страница 5: ...es of the joint of the wing and fuselage by using CA C D C D 90 21 Insert the horizontal stabilizer into the fuselage slot using CA glue 22 Use a knife to cut a slot as the picture shown 23 Glue the control horn using CA 24 Glue the vertical stabilizer onto the fuselage 4 ...

Страница 7: ... Install the ESC on the right of the fuselage hole and then tighten them with the band 38 Use the knife to cut off the superfluous band 39 Install the lipo battery pack and then fix them with velcro 40 There is a receiver location under the wing connect the servo and ESC wire to the receiver And then insert the receiver into the slot 41 Fix the propeller with O ring 6 ...

Страница 8: ...ur careful assembly While assembly the flying weight is really critical to the flight performance and will be affected by adding weight so you should reduce any unnecessary weight while assembly Then you ll get the best flying performance 7 ...