background image

4

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is 
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right 
to change specifications for product improvements without notification.

A Generation Brands Company

Replace the Lamps

Pull out the old lamp.

Push the new lamp pins firmly all the way into the 
socket holes.

NOTE: 

Use only your fingers to replace the lamp.

6A

1

2

ELECTRICAL BOX

SOCKET

LAMP

1

2

Use 

MAX

 

Watt Twin-Tube

Compact Fluorescent Lamp.

Содержание Bath Tigris 700BCTIGOS26 CF Series

Страница 1: ... POWER TO THE ELECTRICAL BOX OFF BATH COLLECTION Locate the studs on the wall where the mirror is going to be mounted Max 22 1 2 separation If necessary use the center hole on the backplate to position the backplate on the wall Use minimum of four slots to mount the backplate to the studs with four screws and washers provided Do not drive the screws all the way in at this time 1A Bring the power l...

Страница 2: ...2 3 4 Prepare the Mirror for Installation Remove the two screws on top and bottom of the electrical box in the center of the pan Remove the electrical box lid Remove one knockout and install the provided conduit connector 2A ELECTRICAL BOX KNOCK OUT LID SCREW 1 2 3 1 1 2 2B Pull out the lamps on the left and right side This will clear the two side pan holes for installation 4 LAMP PAN HOLE SOCKET ...

Страница 3: ...onnect the stranded copper wire to ground in accordance with local electrical codes Refer to Replacing the Lamps on page 4 to replace the lamps 1 2 3 4 120 VOLT POWER LINE WIRES 1 2 Connect Power Replace the lid onto the electrical box and tighten the two screws Carefully attach the mirror onto the hinge and tighten the two screws 5A LID SCREW HINGE SCREW 1 2 2 2 1 1 Attach the Mirror 3 ...

Страница 4: ...f Tech Lighting L L C Tech Lighting reserves the right to change specifications for product improvements without notification A Generation Brands Company Replace the Lamps Pull out the old lamp Push the new lamp pins firmly all the way into the socket holes NOTE Use only your fingers to replace the lamp 6A 1 2 ELECTRICAL BOX SOCKET LAMP 1 2 Use MAX 9 Watt Twin Tube Compact Fluorescent Lamp ...

Отзывы: