1.8
Installation Instructions for
12V Single Feed Recessed Magnetic Transformer
700AT300TR
1
920RT121C
GENERAL PRODUCT INFORMATION:
This product is ETL listed and suitable only for indoor dry
locations and approved for use at any height above the
finished floor.
This product may require some modification (remodeling) to
existing wall where the transformer is to be mounted. The
wall studs should be 16" apart.
A typical installation is shown. Specific installation must be
in accordance with local electrical codes.
This product is suitable for dry locations only.
This product may be dimmed only with a low voltage
magnetic dimmer. Using a dimmer not designed for low
voltage magnetic applications may work initially, but will
eventually cause transformer failure and will void the
warranty. The dimmer must be derated as indicated by the
dimmer manufacturer.
This product is intended for use with Tech Lighting low
voltage lighting systems only.
During installation, make sure all power connections are
tight.
Read all instructions thoroughly. Read "Important Safety
Information" on page 4 before proceeding with the
installation.
TRANSFORMERS
C AUTION — RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
