Tech Controllers EU-293v2, Руководство пользователя

Страница: 9 / 24

EU-293 user’s manual
9
IV. WIRELESS CONTROLLER RECEIVER
The EU-293v2 regulator communicates with the heating device (or the CH boiler controller) by means of a radio signal
sent to the EU-MW-3 receiver. Such a receiver is connected to the heating device (or the CH boiler controller) by means
of a two-core cable, and communicates with the room regulator using a radio signal.
The receiver has three control lights:
• red control light 1 – it signalises data reception;
• red control light 2 – indicates receiver operation;
• red control light 3 – goes on when the room temperature fails to reach the pre-set value – the heating device is switched
on.
NOTE

In case of no communication (e.g. due to discharged battery), the receiver automatically disables the
heating device after 15 minutes.
Registration of the EU-MW-3 receiver:
In order to register relays, select the Reg function in the menu and hold the Menu button or press one of the buttons
. Scs displayed on the screen means that the registration has been successful. If any errors occurred during the
registration, the screen displays Err. In both cases it is possible to continue registration by pressing any button (except
for Exit).
The number of registered relays is displayed on the screen. If 6 relays have been registered (the maximum number), it is
possible to unregister them - Del function appears on the screen. Use one of the buttons to select YES or NO.
registration button
red control light 1
red control light 2
red control light 3