NOTEWORTHY NOTES & CONSIDERATIONS
1) Powering Up and Powering Down.
To avoid the typical loud pop and
potential harm to the Bass Power Wedge 60 speaker, power up in this order:
For mono applications:
1st:
Amp or Pre-amp/processor
2nd:
Bass Power Wedge 60
For stereo applications:
1st:
Stereo processor
2nd:
Amp or Pre-amp/processor
3rd:
Bass Power Wedge 60
With PA System:
Be sure to keep the PA volume fader down until all
connections are made and everything is turned on.
2) Hum.
If nothing is plugged into the input of the Bass Power Wedge 60, you may
notice a slight hum caused by the open transformer. When you plug something into
the input, the circuit will be completed and the hum will disappear.
3) EQ.
We recommend starting with all controls flat. Then use each sparingly as
needed for whatever room you’re in. Remember, you need not set everything at max
to obtain maximum results. It would be rare that turning all the tone controls up
would accomplish a favorable sound. In most instances, a slight cut of the Mid
control should be adequate.
4) Volume.
When chaining the Bass Power Wedge 60 with an amp, be sure to set
the Level control to match (approx.) the output volume of the amp. If the Bass Power
Wedge 60 is set higher than the amp, it may cause undesirable distortion. Note: Rely
on your ears. The position of the level knobs of the amp and Bass Power Wedge 60
may not necessarily be the same.
5) Kick Back and Cables.
As noted in the overview, there are three different
projection angles: 15º, 45º, and 90º to suit your positioning preferences. To avoid
accidental unplugging of your equipment, we recommend feeding your cables
through the spring-loaded handle.
6) Enjoy !
BASS POWER WEDGE 60 SPECIFICATIONS
General Description: Front-ported wedge cabinets constructed of plywood, covered
in heavy duty black carpeting, with chrome-plated steel grill and recessed, spring-
loaded handle.
Model Number:
BPW60
Input Impedance:
10k
Nominal Input Level:
-20dBm to +4dBm
Optimal Output Load:
8
Power Output:
60W
Maximum Power Consumption:
120W
AC Input Power (factory set):
100V, 117V, 220V, 230V, 240V
Cycles:
50/60 Hz
NOTE: Each unit is constructed for specific
voltages. AC power cannot be switched.
Speaker:
Tech 21 Model #2110-B, Cast-frame, custom
designed 10” / 100W - 8
Dimensions:
17.75”w x 16.75”h x 15”d (maximum)
Weight:
35 lbs.
Replacement parts (i.e., knobs, grill panel, speaker, logo plate, handle, etc.) are avail-
able through your authorized dealer, distributor or directly from Tech 21, Inc.
Note: With on-going product development and improvements, specifications and/or
the cosmetic appearance of these units may change without prior notice.
6
7
Содержание Bass Power Wedge 60
Страница 1: ......
