Tecfluid FLOMAT Series, Инструкция по эксплуатации

Страница: 42 / 63

42
10 WORKING SCREEN
When exiting the menu, the display shows the default screen. To scroll between the three
operating screens, press the key (Down / Left) or (Up).
9 SOFTWARE VERSION
From the main menu, if “Software version” is selected, the screen will show this data and the
corresponding date.
c) Installation in which for a time a first product flows through the pipe, and after that a
second product flows in the opposite direction. The programming will be:
Positive flow rate action: Increase
Negative flow rate action: Increase
The totalizer will indicate the volume corresponding to the sum of both products.
Note: To reset the totalizer, go to chapter 5 (page 27).
7.8 Modbus
This option is only implemented in some devices.
It allows to configure the needed parameters to establish a Modbus RTU communication
with the instrument.
Detailed information on this point could be found in the R-IT-MX4COM instructions manual,
that can be downloaded from the Tecfluid S.A. website.
8 SERIAL NUMBER
In this section the converter serial number is shown.