tecan Te-VacS, Руководство по эксплуатации

Страница: 14 / 54

2 - Safety
Decontamination Declaration
14 / 54 Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0
• Limited system knowledge
• Command of local languages
• Command of English
• In-depth knowledge of the corresponding software manual
Responsi-
bilities
• Instructing the operator
• Writing, running and validating methods
• Helping the operator to solve problems with the instrument
2.5 Decontamination Declaration
In addition to regular system care, and in accordance with standard laboratory
regulations, the Te-VacS and its parts and accessories must be thoroughly
decontaminated in the following circumstances:
• Before any maintenance or service work is performed on the Te-VacS and, in
particular, before an
FSE intervention on the Te-VacS
• In the event of accidents (e.g., crash, spillage, etc.)
• Before returning the Te-VacS or its parts or accessories, to Tecan (e.g., for
repair)
• Prior to storage
• Prior to disposal
• In general, before moving the Te-VacS or its parts from its location
The owner of the instrument has full responsibility for the effective decontamination
of all the equipment.
Before any intervention on the Te-VacS by an FSE , and before returning the
Te-VacS or its parts or accessories to Tecan, the owner of the instrument must
complete and sign the Decontamination Declaration form, confirming that the
decontamination has been performed in accordance with good laboratory practice
guidelines. Contact your local service organization to obtain this form and refer to
section
“Decontamination” [
}
38] .
Tecan reserves the right to refuse to deal with any Te-VacS or its parts or
accessories that is not accompanied by the Decontamination Declaration form.