tecan Te-Stack 10612251 Скачать руководство пользователя страница 58

Страница: 58 / 88

6 - 6

Te-Stack Operating Manual, 391862, en, V2.3

6 - Operation

Tasks During a Run

ATTENTION

Risk of damage to equipment. Removing stacker column loaded with nested DiTi
will lead to damage to DiTi.



Install the carrier slide before removing the column.



Remove all nested DiTi stacks form the columns before removal.

Fill the microplates or the DiTi racks from the top into the stacker column.

6.5.3 Refilling Stacker Column for DiTi Boxes

ATTENTION

Compatibility.



A stacker column for DiTi boxes cannot be used for microplates.



DiTi boxes always have to be used without lid.

Fill the DiTi boxes from the top into the stacker column.

6.5.4 Emptying the DiTi Waste (Te-MO Version Only)

Click the

Pause

button.

Replace the full waste bag by an empty one.

Fix the waste bag.

Click the

Continue

button.

Fig. 6-3

Overview of Freedom EVO version in front position

Содержание Te-Stack 10612251

























































































Результаты поиска

Содержание Te-Stack 10612251

Отзывы:

Похожие инструкции для Te-Stack 10612251

Бренды по названию

Популярные бренды

tecan Te-Stack 10612251, Руководство по эксплуатации

Результаты поиска

Содержание Te-Stack 10612251

Отзывы:

Похожие инструкции для Te-Stack 10612251

Бренды по названию

Популярные бренды