2. General
2021-07
Instructions for Use for SUNRISE No. 30086638 Rev. No. 2.9
21
2.3.8
Barcode Labels
Barcode Scanner (Integrated)
– for Plate IDs
Only the following barcode types are suitable for processing:
•
Code 128
•
Code 39
•
Interleaved 2 of 5
Barcode labels must fulfill the following norms:
•
ISO/IEC 15416 Automatic identification and data capture techniques
– Bar
code print quality test specification
•
Linear symbols (e.g. EN 1635).
•
ANSI X3.182-1990 (R1995): Guideline for Bar Code Print Quality
Note
The barcode must have the quality Class A, B or C / ANSI/CEN/ISO
standard. Dirty, folded, wet or damaged barcode labels must not be
used. The adhesive labels must be flat and not peeling off at the edges.
We recommend to guarantee the quality of the barcode labels by means of local
SOP.
The barcode has to be accurately aligned horizontally and positioned on the right
hand side of the plate, 7 mm from the front-right edge. Position the barcode as
near as possible to the bottom.
7
6
55
A1
PARAMETERS
CHARACTERISTICS
Length
max 48 mm (3.5 inch)
Bars height
min 6 mm (0.24 inch)
Quiet zone
min 5 mm (0.2 inch)
Resolution
min 0.15 mm (5.905 mil; 0.0059 inch) module width
Length
max 29 digits
